Brass Rods & Wires |
| |
|
| |
| |
| Lead Free Riveting Brass Rods & Wires |
| |
| IS 4170/67 - CuZn40 |
| |
| Uses: A ductile alloy suitable for blanking, riveting, bending, hot forging and pressing, hot heading, up-setting large nuts & bolts and brazing rods. |
| |
| IS 4413/81 - CuZn37 |
| Uses: A ductile alloy suitable for blanking, riveting, bending, hot forging and pressing, hot heading, up-setting large nuts & bolts and brazing rods. |
| |
Riveting Brass Wires (Leaded) |
| IS 2704/83 - CuZn35Pb1 |
| Uses: A ductile alloy with good machinability as well as bending and cold heading properties. Suitable for bicycle spoke nipples. |
| |
|
|
|
| |
Free Cutting Brass Rods |
| IS 319/89 - Grade I |
| Uses: The most suitable material for high speed machining, but have limited ability to be cold worked. Also used for architectural extrusions, thresholds, hardware, gears, pinions, automat parts, screw machine parts, hinges, lock bodies, screws, nuts & bolts. |
| |
| IS 319/89 - Grade II |
| Uses: Excellent machinability combined with sufficient ductility for some cold work. Also used for architectural extrusions, thresholds, hardware, gears, pinions, automat parts, screw machine parts, hinges, lock bodies, screws, nuts & bolts. |
| |
| IS 319/89 - Grade III |
| Uses: Uses: Operation of machining and low riveting. |
| |
| BS 2874 - CZ 121 Pb3 |
| Uses: The most suitable material for high speed machining, but have limited ability to be cold worked. Also used for architectural extrusions, thresholds, hardware, gears, pinions, automat parts, screw machine parts, hinges, lock bodies, screws, nuts & bolts. |
| |
| UNS C36000 |
| Uses: Used in terrazzo strip, sensor bodies, thermostat parts, fluid connectors, threaded inserts for plastic, lock bodies, fittings, hardware, screws, nuts, bolts, pinions, automatic screw machine parts, valve stems and plumbing fittings. |
| |
| Free Cutting Brass Rods with Improved Ductility |
| |
| BS 2874 - CZ 131 |
| Uses: Electrical components and auto parts. Improves ductility while retaining free machining characteristics. |
| |
| Free Cutting & Forging Brass Rods |
| EN 12164 : 1998 |
| |
| DIN 17660 |
| |
|
Forging Brass Rods |
| BS 218 |
| Uses: Forgings & Pressings of all kind for components requiring free cutting as well as forging quality. |
| |
| IS - 6912/2005 FLB |
| Uses: Forgings & Pressings of all kind for components requiring free cutting as well as forging quality. |
| |
| Modified Forging Brass |
| |
| IS - 8737 |
| Uses: |
- LPG and other gas cylinder valves.
- Pump rods, shafts, valve systems etc.
|
|
| |
High Tensile Brass Rods |
| IS 320/80 |
| Uses: |
HT-1 is suitable for soldering.
HT-2 is suitable for machining. |
| |
| BS 2874 - CZ 114 |
| Uses: Balls, clutch discs, pump rods, shafts, valves, stems & bodies welding rods and components requiring high strength and resistance to corrosion. |
| |
| BS 2874 - CZ 115 |
| Uses: Similar to CZ 114, but the restriction in aluminium content avoids non-wetting problems during soft soldering operations. |
| |
|
Naval Brass Rods |
| IS 291/89 - Grade I |
| Uses: Condenser plates, welding rods, marine hardware and propeller shafts. |
| |
| IS 291/89 - Grade II |
| Uses: Marine Hardware, screw machine products, valves and stems. |
| |
|
| |
|
